Video Tutorial

Become familiarized with Flashforge products through how-to video tutorials. It’s an interactive and easy-to-follow approach to learn how to perform services yourself.

Quick Start

01. Unboxing

This video shows you how to properly remove Creator X and its components from the package safely.

02. Hardware Setup

5 minutes of assembly time is all that’s needed to get Creator 3D printer up and running.

03. Loading & Unloading Filament

Filament is the building block of 3D objects. This video runs through the proper procedure for feeding and removing filament for Creator X.

04. Leveling the Build Plate

Properly leveled print bed is essential to making quality prints. Watch as our expert demonstrates the proper steps to leveling the bed.

05. Setting up ReplicatorG

Replicator G is a slicing software that comes with the Creator X 3D printer. This video provides a quick rundown of the basic settings required to make your 3D object in Replicator G.

06. Initial Print

Learn how to import a sample model into Replicator G, input the correct print settings, and turn the digital model into a physical object using Creator X.

How-To

Disassemble the Extruder

Extruder clogs or jams are mainly due to the quality of the filament being used. Follow the steps in this video to easily take apart the extruder assembly in order to remove clogs.

Install the Enclosure Kit

Replicator G is a slicing software that comes with the Creator X 3D printer. This video offers a quick rundown of the basic settings required to make your 3D object in Replicator G.

How-To

Disassemble the Extruder

Jammed extruder occurs when bad filament is fed to a 3D printer. Perform your own repair by disassembling the Dreamer’s extruder assembly.

Connect to Wi-Fi

One of the three methods of connecting to the Dreamer 3D printer is through Wi-Fi. It communicates with FlashPrint so that you can control Dreamer’s settings and extruder movements handsfree. This video walks you through the steps for connecting to Wi-Fi.